LibreMDb is a free & open source IMDb front-end. It’s inspired by projects like Teddit, Nitter and many others. You can browse any movie info without being tracked or overwhelmed by annoying ADS. LibreMDb has a modern, responsive interface with curated colors supporting both dark and light themes. In this step by step guide I will show you how to install LibreMDb on your Synology NAS using Docker & Portainer.
STEP 1
Please Support My work by Making a Donation.
STEP 2
Install Portainer using my step by step guide. If you already have Portainer installed on your Synology NAS, skip this STEP. Attention: Make sure you have installed the latest Portainer version.
STEP 3
Make sure you have a synology.me Wildcard Certificate. Follow my guide to get a Wildcard Certificate. If you already have a synology.me Wildcard certificate, skip this STEP.
STEP 4
Go to Control Panel / Login Portal / Advanced Tab / click Reverse Proxy. Follow the instructions in the image below.
STEP 5
Now click the “Create” button. Follow the instructions in the image below.
STEP 6
After you click the Create button, the window below will open. Follow the instructions in the image below.
On the General area, set the Reverse Proxy Name description: type in libremdb. After that, add the following instructions:
Source:
Protocol: HTTPS
Hostname: libremdb.yourname.synology.me
Port: 443
Check Enable HSTS
Destination:
Protocol: HTTP
Hostname: localhost
Port: 6342
STEP 7
On the Reverse Proxy Rules click the Custom Header tab. Click Create and then, from the drop-down menu, click WebSocket. After you click on WebSocket, two Header Names and two Values will be automatically added. Click Save. Follow the instructions in the image below.
STEP 8
Go to Control Panel / Network / Connectivity tab/ Check Enable HTTP/2 then click Apply. Follow the instructions in the image below.
STEP 9
Go to Control Panel / Security / Advanced tab/ Check Enable HTTP Compression then click Apply. Follow the instructions in the image below.
STEP 10
Log into Portainer using your username and password. On the left sidebar in Portainer, click on Stacks then + Add stack. Follow the instructions in the image below.
STEP 11
In the Name field type in libremdb. Follow the instructions in the image below.
version: "3.9"
services:
redis:
image: redis
container_name: LibreMDb-REDIS
hostname: libremdb-redis
mem_limit: 1g
cpu_shares: 768
security_opt:
- no-new-privileges:true
read_only: true
user: 1026:100
healthcheck:
test: ["CMD-SHELL", "redis-cli ping || exit 1"]
environment:
TZ: Europe/Bucharest
restart: on-failure:5
libremdb:
image: quay.io/pussthecatorg/libremdb:latest
container_name: LibreMDb
hostname: libremdb
mem_limit: 1g
cpu_shares: 768
security_opt:
- no-new-privileges:true
read_only: true
user: 1026:100
healthcheck:
test: wget --no-verbose --tries=1 --spider http://localhost:3000
ports:
- 6342:3000
environment:
USE_REDIS: true
REDIS_CACHE_TTL_API: 3600
REDIS_CACHE_TTL_MEDIA: 3600
REDIS_URL: libremdb-redis:6379
NEXT_TELEMETRY_DISABLED: 1
NEXT_PUBLIC_URL: https://libremdb.yourname.synology.me
AXIOS_USERAGENT: 'Mozilla/5.0 (X11; Linux x86_64; rv:108.0) Gecko/20100101 Firefox/108.0'
AXIOS_ACCEPT: 'text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,*/*;q=0.8'
restart: on-failure:5
depends_on:
redis:
condition: service_healthy
Note: Before you paste the code above in the Web editor area below, change the value numbers for user with your own UID and GID values. (Follow my step by step guide on how to do this.) 1026 is my personal UID value and 100 is my personal GID value. You have to type in your own values.
Note: Before you paste the code above in the Web editor area below, change the value for TZ. (Select your current Time Zone from this list.)
Note: Before you paste the code above in the Web editor area below, change the value for NEXT_PUBLIC_URL and add your own synology.me DDNS address that you have previously created at STEP 6 with https:// at the beginning.
STEP 12
Scroll down on the page until you see a button named Deploy the stack. Click on it. Follow the instructions in the image below. The installation process can take up to a few minutes. It will depend on your Internet speed connection.
STEP 13
If everything goes right, you will see the following message at the top right of your screen: “Success Stack successfully deployed“.
STEP 14
Go back to STEP 1 or you will deal with karma 🙂.
STEP 15
Now open your browser and type in your HTTPS/SSL certificate like this https://libremdb.yourname.synology.me In my case it’s https://libremdb.mariushosting.synology.me If everything goes right, you will see the LibreMDb search page. Search for a movie, then click Submit. Follow the instructions in the image below.
STEP 16
Click on the movie that you are interested in. Follow the instructions in the image below.
STEP 17
Your LibreMDb at a glance!
Enjoy LibreMDb!
If you encounter issues by using this container, make sure to check out the Common Docker issues article.
Note: Can I run Docker on my Synology NAS? See the supported models.
Note: How to Back Up Docker Containers on your Synology NAS.
Note: Find out how to update the LibreMDb container with the latest image.
Note: How to Free Disk Space on Your NAS if You Run Docker.
Note: How to Schedule Start & Stop For Docker Containers.
Note: How to Activate Email Notifications.
Note: How to Add Access Control Profile on Your NAS.
Note: How to Change Docker Containers Restart Policy.
Note: How to Use Docker Containers With VPN.
Note: Convert Docker Run Into Docker Compose.
Note: How to Clean Docker.
Note: How to Clean Docker Automatically.
Note: Best Practices When Using Docker and DDNS.
Note: Some Docker Containers Need WebSocket.
Note: Find out the Best NAS Models For Docker.
Note: Activate Gmail SMTP For Docker Containers.
This post was updated on Sunday / April 21st, 2024 at 1:50 PM