Synology Install Dashdot With Portainer

by

Synology Install Dashdot With Portainer

My previous guide for Dashdot involved the use of Task Scheduler. Today I’m offering a recommended and excellent alternative for installing the latest Dashdot version via Portainer. Dashdot (or dash.) is a modern server dashboard, developed with a simple, but performant stack and designed with glassmorphism in mind. It is intended to be used for smaller VPS and private servers like a Synology NAS device. In this step by step guide I will show you how to install Dashdot on your Synology NAS using Docker & Portainer. 💡Note: You can also check the Dashdot alternative Ward.

💡Note: This guide works perfectly with the latest Dash. v5.9.0 release.

  • STEP 1

Please Support My work by Making a Donation.

  • STEP 2

Install Portainer using my step by step guide. If you already have Portainer installed on your Synology NAS, skip this STEP. Attention: Make sure you have installed the latest Portainer version.

  • STEP 3

Log into Portainer using your username and password. On the left sidebar in Portainer, click on Stacks then + Add stack. Follow the instructions in the image below.

1 Synology Portainer Add Stack

  • STEP 4

In the Name field type in dashdot. Follow the instructions in the image below.

Note: Copy Paste the code below in the Portainer Stacks Web editor.

version: "3.9"
services:
  dashdot:
    container_name: Dashdot
    image: mauricenino/dashdot
    mem_limit: 4g
    cpu_shares: 768
    security_opt:
      - no-new-privileges:true
    restart: on-failure:5
    volumes:
      - /:/mnt/host:ro
    ports:
      - 7512:3001
    privileged: true
    environment:
      DASHDOT_ENABLE_CPU_TEMPS: true
      DASHDOT_OVERRIDE_OS: Synology DSM

Dashdot Synology NAS Portainer Set up 1

  • STEP 5

Scroll down on the page until you see a button named Deploy the stack. Click on it. Follow the instructions in the image below. The installation process can take up to a few minutes. It will depend on your Internet speed connection.

Dashdot Synology NAS Portainer Set up 2

  • STEP 6

If everything goes right, you will see the following message at the top right of your screen: “Success Stack successfully deployed“.

Dashdot Synology NAS Portainer Set up 3

  • STEP 7

Go back to STEP 1 or you will deal with karma 🙂

  • STEP 8

The installation process can take up to a few seconds/minutes. It will depend on your Internet speed connection. Now open your browser and type in http://Synology-ip-address:7512

Dashdot Synology NAS Portainer Set up 4

Enjoy Dashdot!

🆘TROUBLESHOOTING

If you encounter issues by using this container, make sure to check out the Common Docker issues article.

Note: If you want to run the Dashdot container over HTTPS, check How to Run Docker Containers Over HTTPS. In order to make Dashdot work via HTTPS, it’s mandatory to activate WebSocket.

Note: Can I run Docker on my Synology NAS? See the supported models.
Note: How to Back Up Docker Containers on your Synology NAS.
Note: Find out how to update the Dashdot container with the latest image.
Note: How to Free Disk Space on Your NAS if You Run Docker.
Note: How to Schedule Start & Stop For Docker Containers.
Note: How to Activate Email Notifications.
Note: How to Add Access Control Profile on Your NAS.
Note: How to Change Docker Containers Restart Policy.
Note: How to Use Docker Containers With VPN.
Note: Convert Docker Run Into Docker Compose.
Note: How to Clean Docker.
Note: How to Clean Docker Automatically.
Note: Best Practices When Using Docker and DDNS.
Note: Some Docker Containers Need WebSocket.
Note: Find out the Best NAS Models For Docker.
Note: Activate Gmail SMTP For Docker Containers.

This post was updated on Sunday / November 3rd, 2024 at 6:00 PM

🧡 I Need Your Help!