Synology Install Hammond With Portainer

by

Synology Install Hammond With Portainer

My previous guide for Hammond involved the use of Task Scheduler. Today I’m offering a recommended and excellent alternative for installing the latest Hammond version via Portainer. Hammond is a self hosted vehicle management system to track fuel and other expenses related to all of your vehicles. It supports multiple users sharing multiple vehicles. It is the logical successor to Clarkson which has not been updated for quite some time now. In this step by step guide I will show you how to install Hammond on your Synology NAS using Docker & Portainer.

💡Note: This guide works perfectly with the latest Hammond v0.0.24 release.

  • STEP 1

Please Support My work by Making a Donation.

  • STEP 2

Install Portainer using my step by step guide. If you already have Portainer installed on your Synology NAS, skip this STEP. Attention: Make sure you have installed the latest Portainer version.

  • STEP 3

Go to File Station and open the docker folder. Inside the docker folder, create one new folder and name it hammond. Follow the instructions in the image below.
Note: Be careful to enter only lowercase, not uppercase letters.

Hammond Synology NAS Set up 1

  • STEP 4

Now create two new folders inside the hammond folder that you created at STEP 3 and name them data and config. Follow the instructions in the image below.
Note: Be careful to enter only lowercase, not uppercase letters.

Hammond Synology NAS Set up 2

  • STEP 5

Log into Portainer using your username and password. On the left sidebar in Portainer, click on Stacks then + Add stack. Follow the instructions in the image below.

1 Synology Portainer Add Stack

  • STEP 6

In the Name field type in hammond. Follow the instructions in the image below.

Note: Copy Paste the code below in the Portainer Stacks Web editor.

version: "3.9"
services:
  hammond:
    container_name: Hammond
    image: alfhou/hammond
    security_opt:
      - no-new-privileges:false
      - seccomp:unconfined
    environment:
     JWT_SECRET: MariushostingMariushostingMari13
    volumes:
      - /volume1/docker/hammond/config:/config:rw
      - /volume1/docker/hammond/data:/assets:rw
    ports:
      - 3200:3000
    restart: on-failure:5

Note: Before you paste the code above in the Web editor area below, change the value for JWT_SECRET and add your own JWT_SECRET. MariushostingMariushostingMari13 is an example for a SECRET KEY. You should invent your own Value. Add 32 random characters, both letters and numbers.

Hammond Synology NAS Set up 3

  • STEP 7

Scroll down on the page until you see a button named Deploy the stack. Click on it. Follow the instructions in the image below. The installation process can take up to a few minutes. It will depend on your Internet speed connection.

Hammond Synology NAS Set up 4

  • STEP 8

If everything goes right, you will see the following message at the top right of your screen: “Success Stack successfully deployed“.

Hammond Synology NAS Set up 5

  • STEP 9

Go back to STEP 1 or you will deal with karma 🙂

  • STEP 10

The installation process can take up to a few seconds/minutes. It will depend on your Internet speed connection. Now open your browser and type in http://Synology-ip-address:3200/initialize Click Fresh Install. Follow the instructions in the image below.

Hammond Synology NAS Set up 6

  • STEP 11

Add your own Name, Email and Password. Select your Currency and Distance Unit, then click Save. Follow the instructions in the image below.

Hammond Synology NAS Set up 7

  • STEP 12

After you click save, you will get a message that says: “You have been registered successfully. You will be redirected to the login screen shortly where you can login and start using the system.” If the automatic redirect does not work, access the login page by connecting to http://Synology-ip-address:3200/login Follow the instructions in the image below.

Hammond Synology NAS Set up 8

  • STEP 13

After you connect to the http://Synology-ip-address:3200/login add your own Email and Password that you have previously chosen at STEP 11. Follow the instructions in the image below.

Hammond Synology NAS Set up 9

  • STEP 14

Your Hammond dashboard at a glance!

Hammond Synology NAS Set up 10

Enjoy Hammond!

🆘TROUBLESHOOTING

If you encounter issues by using this container, make sure to check out the Common Docker issues article.

Note: If you want to run the Hammond container over HTTPS, check How to Run Docker Containers Over HTTPS. In order to make Hammond work via HTTPS, it’s mandatory to activate WebSocket.

Note: Can I run Docker on my Synology NAS? See the supported models.
Note: How to Back Up Docker Containers on your Synology NAS.
Note: Find out how to update the Hammond container with the latest image.
Note: How to Free Disk Space on Your NAS if You Run Docker.
Note: How to Schedule Start & Stop For Docker Containers.
Note: How to Activate Email Notifications.
Note: How to Add Access Control Profile on Your NAS.
Note: How to Change Docker Containers Restart Policy.
Note: How to Use Docker Containers With VPN.
Note: Convert Docker Run Into Docker Compose.
Note: How to Clean Docker.
Note: How to Clean Docker Automatically.
Note: Best Practices When Using Docker and DDNS.
Note: Some Docker Containers Need WebSocket.
Note: Find out the Best NAS Models For Docker.
Note: Activate Gmail SMTP For Docker Containers.

This post was updated on Monday / May 6th, 2024 at 8:29 PM

🧡 I Need Your Help!