Bar Assistant is a self hosted application for managing your home bar. It allows you to search and filter cocktails, add ingredients and create custom cocktail recipes. In this step by step guide I will show you how to install Bar Assistant on your Synology NAS using Docker & Portainer.

💡Note: This guide works perfectly with the latest Bar Assistant v4.1.0 release.

• STEP 1

Please Support My work by Making a Donation.

• STEP 2

Install Portainer using my step by step guide. If you already have Portainer installed on your Synology NAS, skip this STEP. Attention: Make sure you have installed the latest Portainer version.

• STEP 3

Make sure you have a synology.me Wildcard Certificate. Follow my guide to get a Wildcard Certificate. If you already have a synology.me Wildcard certificate, skip this STEP.

• STEP 4

Go to Control Panel / Login Portal / Advanced Tab / click Reverse Proxy. Follow the instructions in the image below.

• STEP 5

Now click the “Create” button. Follow the instructions in the image below.

• STEP 6

After you click the Create button, the window below will open. Follow the instructions in the image below.

On the General area, set the Reverse Proxy Name description: type in Bar Assistant. After that, add the following instructions:

Source:
Protocol: HTTPS
Hostname: bar.yourname.synology.me
Port: 443

Check Enable HSTS

Destination:
Protocol: HTTP
Hostname: localhost
Port: 4200

• STEP 7

On the Reverse Proxy Rules click the Custom Header tab. Click Create and then, from the drop-down menu, click WebSocket. After you click on WebSocket, two Header Names and two Values will be automatically added. Click Save. Follow the instructions in the image below.

• STEP 8

Go to Control Panel / Network / Connectivity tab/ Check Enable HTTP/2 then click Apply. Follow the instructions in the image below.

• STEP 9

Go to Control Panel / Security / Advanced tab/ Check Enable HTTP Compression then click Apply. Follow the instructions in the image below.

• STEP 10

Go to File Station and open the docker folder. Inside the docker folder, create one new folder and name it barassistant. Follow the instructions in the image below.
Note: Be careful to enter only lowercase, not uppercase letters.

• STEP 11

Now create three new folders inside the barassistant folder that you created at STEP 10 and name them bar-data, meilisearch, redis. Follow the instructions in the image below.
Note: Be careful to enter only lowercase, not uppercase letters.

• STEP 12

Download the nginx.conf file by clicking the blue link below, then upload it in the barassistant folder that you have previously created at STEP 10. Follow the instructions in the image below. 🔒Note: Support my work to unlock the password. You can use this password to download any file on mariushosting forever!

👉🏻Download nginx.conf file

• STEP 13

Right click on the barassistant folder that you have previously created at STEP 10 then click Properties. Follow the instructions in the image below.

• STEP 14

Go to the Permission tab then click Advanced options. From the drop-down menu choose “Make inherited permissions explicit“. Follow the instructions in the image below.

• STEP 15

Select Everyone then click the Edit tab. Follow the instructions in the image below.

• STEP 16

Check all Read and Write Permissions. Click Done. Follow the instructions in the image below.

• STEP 17

After you click Done on STEP 16, check “Apply to this folder, sub-folders and files“. Click Save. Follow the instructions in the image below.

• STEP 18

Log into Portainer using your username and password. On the left sidebar in Portainer, click on Stacks then + Add stack. Follow the instructions in the image below.

• STEP 19

In the Name field type in barassistant. Follow the instructions in the image below.

Note: Copy Paste the code below in the Portainer Stacks Web editor.

services:
  redis:
    image: redis
    container_name: Bar-Assistant-REDIS
    hostname: barassistant-redis
    mem_limit: 256m
    mem_reservation: 50m
    cpu_shares: 768
    security_opt:
      - no-new-privileges:true
    read_only: true
    user: 1026:100
    healthcheck:
      test: ["CMD-SHELL", "redis-cli ping || exit 1"]
    volumes:
      - /volume1/docker/barassistant/redis:/data:rw
    environment:
      TZ: Europe/Bucharest
      ALLOW_EMPTY_PASSWORD: yes
    restart: on-failure:5

  meilisearch:
    image: getmeili/meilisearch:latest
    container_name: Bar-Assistant-SEARCH
    hostname: barassistant-search
    mem_limit: 512m
    cpu_shares: 768
    security_opt:
      - no-new-privileges:true
    healthcheck:
      test: wget --no-verbose --tries=1 --spider http://localhost:7700
    volumes:
      - /volume1/docker/barassistant/meilisearch:/meili_data:rw
    environment:
      MEILI_MASTER_KEY: LxgEN9GPU2xhjtJseX2d5j7DP49Uv4Bg
      MEILI_ENV: production
    restart: on-failure:5

  bar-assistant:
    image: barassistant/server:v4
    container_name: Bar-Assistant
    hostname: barassistant
    mem_limit: 512m
    cpu_shares: 768
    security_opt:
      - no-new-privileges:true
    volumes:
      - /volume1/docker/barassistant/bar-data:/var/www/cocktails/storage/bar-assistant:rw
    environment:
      APP_URL: https://bar.yourname.synology.me/bar
      ALLOW_REGISTRATION: true
      LOG_CHANNEL: stderr
      MEILISEARCH_KEY: LxgEN9GPU2xhjtJseX2d5j7DP49Uv4Bg
      MEILISEARCH_HOST: http://barassistant-search:7700
      REDIS_HOST: barassistant-redis
      CACHE_DRIVER: redis
      SESSION_DRIVER: redis
    restart: on-failure:5
    depends_on:
      meilisearch:
        condition: service_healthy
      redis:
        condition: service_healthy

  salt-rim:
    image: barassistant/salt-rim:v3
    container_name: Bar-Assistant-SALT-RIM
    hostname: barassistant-salt-rim
    mem_limit: 512m
    cpu_shares: 768
    security_opt:
      - no-new-privileges:true
    healthcheck:
      test: curl -f http://localhost:8080/ || exit 1
    environment:
      API_URL: https://bar.yourname.synology.me/bar
      MEILISEARCH_URL: https://bar.yourname.synology.me/search
    restart: on-failure:5
    depends_on:
      bar-assistant:
        condition: service_started

  webserver:
    image: nginx:alpine
    container_name: Bar-Assistant-WEB
    hostname: barassistant-web
    mem_limit: 512m
    cpu_shares: 768
    security_opt:
      - no-new-privileges:true
    healthcheck:
      test: wget --no-verbose --tries=1 --spider http://localhost:3000
    ports:
      - 4200:3000
    volumes:
      - /volume1/docker/barassistant/nginx.conf:/etc/nginx/conf.d/default.conf:ro
    restart: on-failure:5
    depends_on:
      salt-rim:
        condition: service_healthy

Note: Before you paste the code above in the Web editor area below, change the value numbers for user with your own UID and GID values. (Follow my step by step guide on how to do this.) 1026 is my personal UID value and 100 is my personal GID value. You have to type in your own values.
Note: Before you paste the code above in the Web editor area below, change the value for TZ. (Select your current Time Zone from this list.)
Note: Before you paste the code above in the Web editor area below, change the value for APP_URL and API_URL and type in your own synology.me DDNS with https:// at the beginning that you have previously created at STEP 6 and /bar at the end.
Note: Before you paste the code above in the Web editor area below, change the value for MEILISEARCH_URL and type in your own synology.me DDNS with https:// at the beginning that you have previously created at STEP 6 and /search at the end.

• STEP 20

Scroll down on the page until you see a button named Deploy the stack. Click on it. Follow the instructions in the image below. The installation process can take up to a few minutes. It will depend on your Internet speed connection.

• STEP 21

If everything goes right, you will see the following message at the top right of your screen: “Success Stack successfully deployed“.

• STEP 22

Go back to STEP 1 or you will deal with karma 🙂

• STEP 23

Now open your browser and type in your HTTPS/SSL certificate like this https://bar.yourname.synology.me In my case it’s https://bar.mariushosting.synology.me If everything goes right, you will see the Bar Assistant login page. Click Register. Follow the instructions in the image below.

• STEP 24

Type in your own details, then click Register. Follow the instructions in the image below.

• STEP 25

Type in your own Email Address and Password that you have previously created at STEP 24. Click Login. Follow the instructions in the image below.

• STEP 26

At the top right of the page, click Create bar. Follow the instructions in the image below.

• STEP 27

Type in your own Bar Details, then click Save. Follow the instructions in the image below.

• STEP 28

Click Select bar. Follow the instructions in the image below.

• STEP 29

You can easily switch the theme to Dark. Follow the instructions in the image below.

• STEP 30

Search for your favorite Cocktails. Follow the instructions in the image below.

• STEP 31

If you want to disable user registration in Bar Assistant after registering the first user, just change the following line in the compose at STEP 19:

ALLOW_REGISTRATION: true

with the following one:

ALLOW_REGISTRATION: false

Click update the stack to update the settings. From this point on, any user that will try to register a new account in Bar Assistant will be rejected.

Enjoy Bar Assistant!

🆘TROUBLESHOOTING

If you encounter issues by using this container, make sure to check out the Common Docker issues article.

Note: Can I run Docker on my Synology NAS? See the supported models.
Note: How to Back Up Docker Containers on your Synology NAS.
Note: Find out how to update the Bar Assistant container with the latest image.
Note: How to Free Disk Space on Your NAS if You Run Docker.
Note: How to Schedule Start & Stop For Docker Containers.
Note: How to Activate Email Notifications.
Note: How to Add Access Control Profile on Your NAS.
Note: How to Change Docker Containers Restart Policy.
Note: How to Use Docker Containers With VPN.
Note: Convert Docker Run Into Docker Compose.
Note: How to Clean Docker.
Note: How to Clean Docker Automatically.
Note: Best Practices When Using Docker and DDNS.
Note: Some Docker Containers Need WebSocket.
Note: Find out the Best NAS Models For Docker.
Note: Activate Gmail SMTP For Docker Containers.

This post was updated on Tuesday / November 19th, 2024 at 6:26 PM