Gokapi is a lightweight server to share files, which expire after a set amount of downloads or days. It is similar to the discontinued Firefox Send, with the difference that only the admin is allowed to upload files. In this step by step guide I will show you how to install Gokapi on your Synology NAS using Docker & Portainer.

💡Note: This guide works perfectly with the latest version of Gokapi v1.9.1

• STEP 1

Please Support My work by Making a Donation.

• STEP 2

Install Portainer using my step by step guide. If you already have Portainer installed on your Synology NAS, skip this STEP. Attention: Make sure you have installed the latest Portainer version.

• STEP 3

Make sure you have a synology.me Wildcard Certificate. Follow my guide to get a Wildcard Certificate. If you already have a synology.me Wildcard certificate, skip this STEP.

• STEP 4

Go to Control Panel / Login Portal / Advanced Tab / click Reverse Proxy. Follow the instructions in the image below.

• STEP 5

Now click the “Create” button. Follow the instructions in the image below.

• STEP 6

After you click the Create button, the window below will open. Follow the instructions in the image below.

On the General area, set the Reverse Proxy Name description: type in Gokapi. After that, add the following instructions:

Source:
Protocol: HTTPS
Hostname: gokapi.yourname.synology.me
Port: 443

Check Enable HSTS

Destination:
Protocol: HTTP
Hostname: localhost
Port: 53842

• STEP 7

On the Reverse Proxy Rules click the Custom Header tab. Click Create and then, from the drop-down menu, click WebSocket. After you click on WebSocket, two Header Names and two Values will be automatically added. Click Save. Follow the instructions in the image below.

• STEP 8

Go to Control Panel / Network / Connectivity tab/ Check Enable HTTP/2 then click Apply. Follow the instructions in the image below.

• STEP 9

Go to Control Panel / Security / Advanced tab/ Check Enable HTTP Compression then click Apply. Follow the instructions in the image below.

• STEP 10

Go to File Station and open the docker folder. Inside the docker folder, create one new folder and name it gokapi. Follow the instructions in the image below.
Note: Be careful to enter only lowercase, not uppercase letters.

• STEP 11

Now create two new folders inside the gokapi folder that you created at STEP 10 and name them config and data. Follow the instructions in the image below.
Note: Be careful to enter only lowercase, not uppercase letters.

• STEP 12

Log into Portainer using your username and password. On the left sidebar in Portainer, click on Stacks then + Add stack. Follow the instructions in the image below.

• STEP 13

In the Name field type in gokapi. Follow the instructions in the image below.

Note: Copy Paste the code below in the Portainer Stacks Web editor.

version: "3.9"
services:
  gokapi:
    container_name: Gokapi
    image: f0rc3/gokapi:latest
    ports:
      - 53842:53842
    volumes:
      - /volume1/docker/gokapi/data:/app/data
      - /volume1/docker/gokapi/config:/app/config
    restart: on-failure:5

• STEP 14

Scroll down on the page until you see a button named Deploy the stack. Click on it. Follow the instructions in the image below. The installation process can take up to a few minutes. It will depend on your Internet speed connection.

• STEP 15

If everything goes right, you will see the following message at the top right of your screen: “Success Stack successfully deployed“.

• STEP 16

Go back to STEP 1 or you will deal with karma 🙂.

• STEP 17

Now open your browser and type in your HTTPS/SSL certificate like this https://gokapi.yourname.synology.me/setup In my case it’s https://gokapi.mariushosting.synology.me/setup If everything goes right, you will see the Gokapi Setup page. Click Next. Follow the instructions in the image below.

• STEP 18

Click Next without touching anything else. Follow the instructions in the image below.

• STEP 19

In the Public facing URL area type in your own Synology.me DDNS that you have previously created at STEP 6 with https:// at the beginning. In the Redirection URL for the index area type in your own Synology.me DDNS that you have previously created at STEP 6 with https:// at the beginning and /login at the end. Click Next. Follow the instructions in the image below.

• STEP 20

Select Username / Password then click Next. Follow the instructions in the image below.

• STEP 21

Type in your own Username and Password then click Next. Follow the instructions in the image below.

• STEP 22

Click Next without touching anything else. Follow the instructions in the image below.

• STEP 23

Click Next. Follow the instructions in the image below.

• STEP 24

Click Submit. Follow the instructions in the image below.

• STEP 25

Click Continue. Follow the instructions in the image below.

• STEP 26

Type in your own Username and Password that you have previously created at STEP 21 then click Login. Follow the instructions in the image below.

• STEP 27

Upload your files then click Copy URL to share them. Follow the instructions in the image below.

• STEP 28

Your files at a glance ready to be downloaded.

Enjoy Gokapi!

Note: Can I run Docker on my Synology NAS? See the supported models.
Note: How to Back Up Docker Containers on your Synology NAS.
Note: Find out how to update the Gokapi container with the latest image.
Note: How to Free Disk Space on Your NAS if You Run Docker.
Note: How to Schedule Start & Stop For Docker Containers.
Note: How to Activate Email Notifications.
Note: How to Add Access Control Profile on Your NAS.
Note: How to Change Docker Containers Restart Policy.
Note: How to Use Docker Containers With VPN.
Note: Convert Docker Run Into Docker Compose.
Note: How to Clean Docker.
Note: How to Clean Docker Automatically.
Note: Best Practices When Using Docker and DDNS.
Note: Some Docker Containers Need WebSocket.
Note: Find out the Best NAS Models For Docker.
Note: Activate Gmail SMTP For Docker Containers.

This post was updated on Sunday / August 25th, 2024 at 4:16 AM