Synology: HTTPS-SSL to Your Docker Containers Without Port at The End

by

Synology: HTTPS-SSL to Your Docker Containers Without Port at The End

You all loved my series of articles on how to use an HTTPS/SSL certificate to secure your Docker containers and make them accessible from anywhere, like my article Synology: How to Allow BitWarden to Work Over an HTTPS Connection. And, to continue the series, today I have a new and exciting guide that many of you have been requesting for some time: how to remove the port number at the end of your DDNS synology.me address, for example, :5152. Today I will teach you how to add a custom Subdomain to your synology.me DDNS and use a different one for each of your containers, without worrying about remembering the final port number. Definitely a guide that you will find extremely useful and will surely help make your experience with Synology NAS devices even more exciting.

Remember this is a premium article and your support is appreciated.

  • STEP 1

Please Support My work by Making a Donation.

  • STEP 2

Follow my step by step guide onĀ how to activate your synology.me DDNS on DSM 7
Follow my step by step guide onĀ how to activate your synology.me DDNS on DSM 6.2.4
Note: If you already own a synology.me DDNS, skip this STEP.

  • STEP 3

Go to Control Panel / Security / Certificate then click the Add tab. Follow the instructions in the image below.

Docker Container CNAME Synology NAS 1 new 2023

  • STEP 4

After you click Add on STEP 3 a new pop up window will open. Select Add a new certificate then click Next. Follow the instructions in the image below.

Docker Container CNAME Synology NAS 2

  • STEP 5

After you click Next, select a Description for your certificate. I choose “bitwarden” because I will be using this certificate for my Bitwarden container. Select Get a certificate from Let’s Encrypt then click Next. Follow the instructions in the image below.

Docker Container CNAME Synology NAS 3

  • STEP 6

After you click Next, on the Domain name area, type in bitwarden.yourname.synology.me or the description name you have previously chosen at STEP 5. Type in your email in the Email area, then click Done. Follow the instructions in the image below.

Docker Container CNAME Synology NAS 4

  • STEP 7

After you click Done, you will have to wait a few seconds for your new certificate to be created. If everything goes right, you will see your new certificate in the Certificate area.

Docker Container CNAME Synology NAS 5 new 2023

Note: If you fail to create a new certificate try to create a new certificate using your http://yournasip:5000 instead using the https connection.

  • STEP 8

Go to Control Panel / Login Portal / Advanced Tab / click Reverse Proxy. Follow the instructions in the image below.

Docker Container CNAME Synology NAS 6

  • STEP 9

Now click the “Create” button. Follow the instructions in the image below.

Docker Container CNAME Synology NAS 7

  • STEP 10

After you click the Create button, the window below will open. Follow the instructions in the image below.

On General area, set the Reverse Proxy Name description: type in Bitwarden or the Description you have already chosen at STEP 5. After that, add the following instructions:

Source:
Protocol:Ā HTTPS
Hostname: bitwarden.yourname.synology.me
Port:Ā 443

Check Enable HSTS

Destination:
Protocol:Ā HTTP
Hostname:Ā localhost
Port:Ā 5151 (Read the Note)

Docker Container CNAME Synology NAS 8 new

Note: Under Destination, the localhost port will vary depending on the port you used to create your container. This port can vary from container to container. For example, my Bitwarden container is running in localhost on port 5151.

  • STEP 11

Go to Control Panel / Security / Certificate / Select the certificate you have previously created at STEP 7, then click Settings. Follow the instructions in the image below.

Docker Container CNAME Synology NAS 9 new 2023

  • STEP 12

Your new certificate should be mirroring. Select your Certificate and, from the dropdown menu, select your Certificate again, then click OK. Follow the instructions in the image below.

Docker Container CNAME Synology NAS 10 new 2023

  • STEP 13

Go back toĀ STEP 1Ā or you will deal with karma šŸ™‚

  • STEP 14

Now open your browser and type in your HTTPS/SSL certificate, in my case https://bitwarden.mariushosting.synology.me

Docker Container CNAME Synology NAS 11

Note: In the browser address bar don’t forget to add https:// before the link.

  • STEP 15

Enable HTTP/2

  • STEP 16

Synology DSM 7: Access synology.me without Port :5001

Enjoy!

Note: This guide can be applied to all Synology NAS Docker Containers for which you want to use HTTPS/SSL.
Note: Some Docker containers like Home Assistant (Not All) need WebSocket activation in order to work over an HTTPS connection. To do this, go to Control Panel / Login Portal / select your Reverse Proxy then click the Custom Header tab. Click Create and then, from the drop-down menu, click WebSocket. After you click on WebSocket, two Header Names and two Values will be automatically added. Click Save. Follow the instructions in the image below.

Synology Proxy WebSocket

Note: If you don’t want to create new certificate for all your containers you should use my guide on How to Add Wildcard Certificate.

This post was updated on Friday / April 28th, 2023 at 8:56 PM

šŸ§” I Need Your Help!