Synology Routers RT2600ac and MR2200ac Default Username & Password

Synology Routers RT2600ac and MR2200ac Default Username & Password

Below you can find the default credentials needed to log into your RT2600ac and MR2200ac Synology routers. First of all, remember to connect your Synology Router and PC via an Ethernet LAN cable. After that, open your browser, Chrome, Firefox, Edge, Safari etc. and type the following into the search bar: http://192.168.1.1:8000

The following Synology credentials are needed when you log into the Synology router’s web interface to change any settings.

RT2600ac default factory settings http://192.168.1.1:8000

  • user: admin
  • password: leave blank

MR2200ac default factory settings http://192.168.1.1:8000

  • user: admin
  • password: leave blank

Below are the default credentials for the RT2600ac Wi-Fi network:

  • Wi-Fi SSID: Synology_(Serial)
  • Password: synology

The default credentials can be changed during the initial SRM setup.

Below are the default credentials for the MR2200ac Wi-Fi network:

  • Wi-Fi SSID: Synology_(Serial)
  • Password: synology

The default credentials can be changed during the initial SRM setup.

Have you forgotten your Synology RT2600ac and MR2200ac router password?

Have you changed the username and/or password of your Synology router and forgotten what you changed it to? Don’t worry: the Synology RT2600ac and MR2200ac routers come with a default factory set password that you can revert to by following the instructions below.

Reset Synology router RT2600ac password to default:

  • When your RT2600ac Synology router is powered on, press and hold the reset button for 30 seconds.
  • While still holding the reset button, turn off the power to the router and hold the reset button for another 30 seconds.
  • While still holding the reset button, turn on the power to the router again and hold for another 30 seconds.
  • Your Synology router should now be reset to its factory settings.
  • Read more at this official Synology link.

Reset Synology router MR2200ac password to default:

  • When your Synology router MR2200ac is powered on, press and hold the reset button for 30 seconds.
  • While still holding the reset button, turn off the power to the router and hold the reset button for another 30 seconds.
  • While still holding the reset button, turn on the power to the router again and hold for another 30 seconds.
  • Your Synology router should now be reset to its factory settings.
  • Read more at this official Synology link.

Note: Synology RT2600ac Wi-Fi Router Hardware Installation Guide: Syno_HIG_RouterRT2600ac_enu
Note: Synology MR2200ac Wi-Fi Router Hardware Installation Guide: Syno_HIG_MR2200ac_enu

This post was updated on Sunday / December 15th, 2019 at 11:29 PM